In fact, the electric car charger is theoretically not universal, which is the same as the principle of the mobile phone charger. It is mainly to see whether the voltage and current are consistent. Generally, the charger of the same brand is more likely to be common, but it is used. At the same time, it is still necessary to check whether the voltage and current match. Many users think that it can be used as long as it can be turned on. In fact, it is easy to charge the battery.
However, today's electric vehicle charger products are becoming more and more user-friendly in terms of functional design. In consideration of general problems, the high-standard technology electric vehicle charger is better, as long as the electric vehicle charger and the battery are between The voltage and current are matched, charging is possible, and the high-standard high-end electric car charger and the easy-to-charge electric car charger are all designed with new protection functions, such as constant current charging and constant voltage charging. The main factors that damage the battery of the unsupported electric vehicle charger are the current and voltage problems.
The second problem is the charging time of electric vehicles. Many old-fashioned chargers do not have the function of automatic power-off. After the electric vehicle is charged, it will continue to be charged. This is very easy to cause battery damage due to overcharging. The charger and the easy-to-charge charger now use the smart chip to control the charging management charging process, and the power can be automatically powered off after the charging is completed, which fundamentally solves these problems.
Therefore, the method is also universal, so here are some ways to use the charger correctly:
1. The newly purchased electric vehicle should be fully charged before use. Because many electric vehicles have been put on hold for a few months or even more than half a year in the store, they must be fully charged before use. After fully charged, it is best not to use them immediately. It should be left for about ten minutes.
2. The battery is taken down and charged. When installing, the battery should be installed firmly on the electric bicycle to prevent the battery from being damaged by vibration during riding. When the battery is being transported, it is forbidden to throw, roll, or press.
3. Always remove dust and dirt from the battery cover, and keep the battery dry and clean to prevent the battery from discharging itself.
4, absolutely can not let the battery in a state of insufficient power for a long time, and to develop a good habit of charging the battery every night. Long-term use, should be fully charged, placed in a cool dry place, and charged regularly (usually 10 days).